Guitar Amps

The Cort AF30 and AF60 models provide 30 watts and 60 watts, respectively, of clean solid state power as well as onboard DSP for lush chorus, delay and chorus-delay effects. The AF Series amps also feature a 4-band graphic EQ for further tone-shaping as well as a notch filter to eliminate feedback – a feature normally found in amps that cost much more. Ideal for small venues, rehearsals and practice applications, the mobile but powerful AF30 will extend the range of your acoustic-electric guitar with performance, features, value and musicality. 60W POWER OUTPUT The 60w of the AF60 will be able to handle medium size venues with plenty of power and headroom. 2 x 8” WOOFER + 1 x TWEETER The AF60’s combination of two 8” woofers with a single tweeter provides a balanced sound for firm punchy lows with clear and defined highs. 4-BAND GRAPHIC EQUALIZER The 4-band equalizer features carefully selected frequency bands (70, 400, 800, 10K) that are ideal to bring the natural character of your acoustic guitar while providing a wide range of sounds and tonal character. ONBOARD DSP (FX) The onboard Digital Signal Processor chip provides chorus, delay and chorus + delay effects to add spatial dimension to your acoustic-electric sounds. The type of effect and the level of each effect can easily be controlled with the rotary knobs. The effect can also be switched on and off with the push switch. NOTCH CONTROL Feedback can be a problem with acoustic instruments. With the notch control, you can eliminate the unwanted feedback by engaging the notch switch and using the knob to select the frequency causing the feedback. MIC / AUX-IN / PHONES / PREAMP-OUT The AF60 provides superb flexibility and versatility with in-out jacks to extend the range of the amplifier and your instrument. With pro-level XLR input, auxiliary in for CD players or MP3 players, headphone out and preamp out to connect to mixing consoles and PA systems, the AF60 can cover virtually any application – from practice sessions to large venue concerts. TILT-BACK DESIGN The AF30’s tilt-back cabinet design has two angles for the most optimum sound projection depending on the playing situation. The straight angle is typically used for projecting to an audience while tilt-back is for monitoring the performer’s sound.

The CUB12R houses a 12" driver, giving it an increased volume and full rich valve tone. Looking at the preamp it's clear that the CUB12R packs more into the amp than it's smaller siblings. It features Gain, Treble, Middle, Bass, Volume, Tone and Reverb controls. The output section of the CUB12R is based around a pair of EL84 tubes giving it a more scooped tone than it's smaller counterparts. Think smooth rich overdrive with bags of gain. Straight ahead vintage tone in a small package with simple controls.

The rear panel of the GH50L offers you everything you need to interface your tone machine with out board gear – a selectable FX loop that can be set to work in three different modes depending on what you want to achieve. A selector switch determines which mode the FX loop operates in, either Bypassed, Series or Parallel.

IRONHEART - IRT60-212 Forged deep in the Black Country, the Ironheart series continues the legacy begun decades before with Laney amps such as KLIPP and AOR. Packed full of features, amazing tone and a thoroughly modern and aggressive look, the Ironheart models are extremely versatile modern amplifiers. Capable of masses of usable gain, these amplifiers are perfect for modern metal. Utilising 3 channels and built in pre boosts, they are also extremely versatile in any musical situation. Tones from crystal cleans to bluesy crunch, full on rock to molten modern lead sounds are available at the click of a switch.

The Laney LA10 Acoustic Guitar Amp produces a fantastically pure and dynamic tone and despite the amps small stature it can be very loud. The LA10 runs on a single channel and has a 2 band EQ with a shape switch which provides great sound straight out of the box. The LA10 also features a handy headphone input that allows you to practice privately or to allow you to play into the night.

Practice-friendly features in a bedroom-sized combo. The Laney LG20R is an open back guitar combo amp featuring 15 watts output power into a 8" custom designed speaker. Laney wrapped this amplifier up in a solidly constructed cabinet, with a leather handle, rubber feet and black plastic corners. The LG20R has a split channel preamp layout that gives you separate clean and drive level controls through a shared master EQ with bass, mid and treble. It has a headphone socket for private practicing and a CD/MP3 jack so you can play along with your favorite recordings. The built-in spring reverb has separate level control.

The LX range of solid-state electric guitar amplifiers offers legendary Laney guitar tone and reliability from practice room to stage. BRITISH DESIGN The LX120RH is ready to hit the stage hard. With 120 watts of power, a broad spectrum of tones, it delivers on stage or rehearsal time and time again. TWIN CHANNELS PLUS REVERB Clean and Drive channels both have their own independent 3 band EQ for more variation between sounds. The Drive channel also features switchable XTS tone shaping for an instant scoop to the mid and a boost to key frequencies. On-board reverb can also be dialled in to add ambience to the tone. IDEAL PARTNER The ideal partner for the LX120RH for some serious stage volume is the LX412 cabinet: connect one for a potent half stack or even two to seriously rock out. PERFORMANCE RIG An FX loop allows the connection of outboard effects. Reverb and Channel can be selected remotely with the connection of a footswitch (FS2).